Nice LEGO Work! Glad To See MOCs Are Still Shared By Folks.

✨Bionicle crab !✨

It was, originally, meant to be just another arthropod. However, someone reblogged my previous rahi, along with this comment :

Well, guess what ? Yes, absolutely. I’m glad I saw it because it gave me the inspiration for this monstrosity (and it made me laugh more than I would admit, too). Thanks.

I must recognise that if I compare my rahis, there is a clear pipeline. I don’t think it can go much further in this direction.

Anyways, details/closeups/weird illegal technic I just found out, below the cut !

Front (smol Visorak for scale) :

Because it’s really big. It’s also a good excuse to show off my really fancy and glittery Kanohi. No clue where it comes from but it’s beautiful !

I’m really happy with how mean this things looks, overall. It’s most definitely the bad guy for Toas to fight. It has a really good scale to work with my larger customer Toas [here], but it could also act as a really large rahi for my smaller space-based Toas [here]. Why a large crab stealing Kanohis in space, you may ask ? No idea. I’d have to actually think out a lore for that.

I started the conception with the frame (which does make sense, in theory), then the legs, and finally the shell. This was only partially smart, because that meant I did not account for the shell's mass when building the legs. Essentially, this poor thing can't stand on it's own, so I'm using two technic bars underneath to keep it up right (which are hidden in editing, of course).

Top/Hind (shell) :

I think the shell was pretty decent. I tried to use as little pieces as possible to keep it light, but it's still a lot. Among these pieces can be found one Visorak claw and three Mantax feet, which have a nice texture for organic feet. There is also another foot at the front which comes from an Inika set which I can't seem to find. I'm also using some of these large technic panels, which cover a lot of surface without being too much of a pain to set up (still quite a lot, since they're connected to the feet at at an angle, feet which which are also connected to the frame at an odd angle...) Speaking of Mantax, I alsu used the black-pearl shells, because these, too, have a really organic vibe, and it gave a small touch of pearl which was missing on the body.

I tried to keep the back relatively slick, to avoid something similar to an abdomen since it's not a spider. Still I had to extend it a little bit using the rounded cubical cover, to hide some socket joints, but it's okay-ish.

Neath :

Truly a mess, I must admit. As I started with each side separately, I tried to somehow connect them with the large grey technic frame (in the middle). On either sides, I have a whole bunch of axle connectors, both standard and angled, which allow for the thing to appear rounder than it could have been. The two leg sockets peices at the front are used for the eyes, and the pieces abov (barley visible) is a classic Bionicle shoulders piece clipped backward as a base for the pincers arms.

Pincer :

Or mandatory unusual feet usage. These really works well as any kind of claw or armor, in my opinion. The black arm pieces used here (Hordika leg piece) were particularly good for the job as they technic pin holes in there allowed me to add ad additional socket practically at the same level at the original one (even if I would rather have used black technic bars instead of the light grey ones, but i couldn't find any in my supplies... It's likely the Space station's fault.

Legs :

Or equally mandatory foot out of not foot pieces. Here is a cursed homebrew way to make legs : one Bohrok head part (bricklink call these shoulders ?) to display the piston-like element and serve as structure, linked with Toa Metru legs (which slots above nicely. And then comes the magic trick, for the Rahkshi shells (silveragain, because I have many of these) have a small attachment point toward the end, that is meant to hold the back blades in place; but it also perfectly fits right on the small ledge in the middle of the leg piece ! Granted, it's not a very secure connection, but these two pieces don't need anything else but that to hold. I actually loved this one so much, you can notice two additional Rahkshi shells held similarly on the tope of the crab's shell.

In order to connect the legs individually to the frame, I am using Vahki legs for the exterior limbs, and Pihraka arms for the central ones (these arms have the particular property of having the restrictive sockets on either sides, which makes it good to keep the leg's shape.

The middle sections are made using two simple axle-socket pieces connected by old plates, usually found in technic sets predating the Bionicle them.

…And obviously, I had to make another makeshift studio (I actually really like this one). Have a look at all these terribly assembled elements !

A little replica of a wakeboard ski-lift I made as a present for a friend ! (Other views below)

The system is a little sturdy but it does the work, and the different white modules work as more than simply decoration !

(Sorry for the bad quality of that video-)

✨Quetza and its pilots !✨

Another combat mech ! And I have more in stock~ (See previous work here)

…and of course closeups and lore under the cut :}

Pilot closeups :

Mech closeups :

Lore !

(All the world’s lore can be found in the first of these posts)

So, this mech is quite impressive, notably because it’s one of the only of the arena featuring four arms ! Quite a complex model to handle, but devastating when mastered. Quetza’s been designed by the two sisters who pilot it.

This, too is unusual, because there’s usually only one pilot — two would require an extreme coordination. But the controls have been modified (you can see the controllers in the hands of the pilot, featuring controls on both sides of the objects, while most controllers only have one). These control the essential of the mech’s basic movements, and require to be very dexterous. The pilot using these is the one considered as the 'true' pilot, contrarily to here sister, who acts as a technic team on her own (hence why only of them wear something cool, and the other plain black clothes). But the so-called technical support is actually completely part of the mech’s piloting, because the holoscreen paired with a lone controller help to automate sword combos and general coordination.

Speaking of the swords, they obviously aren’t made of gold, but a good paint job after each battle can help fix that. This type of weapon caused some problems at the start of Quetza’s career, because without them, the mech was defenceless. This have been fixed with magnetic locks, which hold the swords in place while allowing flexibility.

And next time : …I don’t actually have a name for that one yet, you’ll have to wait-

The swords are also a hassle in real life, because they’re only connected to the hands through a meh illegal technic. You can barely see it on the first image, but they are connected to the back finger using a small claw/tooth, which does the job, but nothing more.

Also, I can’t fathom what set all the plates featuring stickers are coming from, if anyone has a lead, please tell me.

Finally, taking the first picture took me about 15 minutes because there was no angle that could reflect what I actually saw, which was terrible.

Bonus, because you held on until there :

Photo of Quetzal from my former shelf studio, not cropped, and with terrible focus (feel the pain I feel when I realise later that this is a terrible photo~)

✨Custom stone Toa !✨

Yay ! It’s so big there are shadows on the top of my shelf studio.

Also, we’re already at 4/6 for these, isn’t that crazy ? I think it is.

Details below the cut !

Front/back :

I had some kind of vision with this one. As I started messaging by around with pieces, my brain said 'scorpion'. So mandibles and tail (and that’s about where the scorpion resemblance ends). Of course, I had to keep an element of Pohatu, so his foot is the end of the tail (which is quite wobbly-).

I tried to vary shapes from what I had previously, so I made some big shoulder parts, which look okay and offer some interesting movements, but are pretty weird if you think about it too hard.

The body-legs connection is a bit thin, but it still kind of work with the overall design, so I left it that way (that, and I am running out of brown pieces…)

The weapon are simple sticks with harpoons (?), nothing too complicated, though it was meant to be a single stick originally, it was waaaay to long for the photos. Also, has anyone any idea of which set these harpoons (still '?') come from ? I can’t seem to find it, apparently.

Side shot :

As you may see, I’ve made all the limbs quite thick, because it fitted what I had in mind well, and I messed with a bunch of old pieces for the legs (mostly the sand pieces). There is also have a Bohrok’s body for each foot, because these work surprisingly well, and the middle segment of the leg is backward to give some hypothetical springiness to the legs. Also, Rahkshi feet as armor, that’s always a good recipe.

Head shot ! (Ah, that’s funny.)

Look at how dark that shot is ! If only I had taller shelves…

Anyway, the head is a mix of Rahkshi and Vahki heads, which mix well (there is also a gear underneath. Don’t ask me why. It just exists.)

All of that makes it looks like a V2 Rahkshi (when there is a single stick) which was pretty much on purpose.

On a side note, I’m pretty much done with my big project (which is good, I’m meant to expose it this weekend. Whoops, that’s suddenly very close.)

And, yes, I finally added the #moc, thank you for reminding me every time, I’ll add it from now on :}

✨Pride clones !✨

As I mentioned somewhere in my previous post (I think ?) I found my clones missing colours. So I did a rainbow Cody, and things went downhill from here.

There's not much to say about it built-wise that I haven't already said, but a few mentions of my colour palette might be interesting, notably some shade of 'rubber' materials, for a few of the purples. Also, there aren't nearly enough blue-green shades to satisfy my needs, but I can't do much about it.

You may also ask for other flags, who knows how they'll look...

Speaking of, the flags here have nothing to do with any headcannons or whatnot, they're purely aesthetic - or practical, since some colour subdivisions are easier to represent on some models than on others.

✨Assault on the droid factory (P1) !✨

A decently-sized MOC I've been working on for the past few weeks. These is the landing platform of the factory, and, hopefully, I will take some time to make the actual factory inside, which is nothing more than an idea, at the moment.

Closeups and details under the cut !

The door :

I have a lot of fun with the mountainside of this MOC : It's been a while since I last did rocky terrain (or any terrain at all), and it is an enjoyable process. Most of the bottom is supported by large rock pieces (for structural integrity), but anything around and above the door is meticulously hand crafted from slopes. I also added some little plants here and there to break the dull grey, including some weird spiralling plants, because alien environment.

The door itself is just a bunch of slopes, and then two black sections. It's not moving and will remain in this half-opened state indefinitely.

The bridge :

Really the heart of the MOC, both visually and structurally. While it's covered everywhere, there are technic bars running under the large plates, and that's what allows everything to stay together. Just below the landing platform, you might spot one small antenna acting as a pillar. It's only there to keep the bridge in this position, as most of the charge is held by the mountain. It was a bit dull at first, so I added the cable running under it, and the small barriers, which fit the aesthetic without being overwhelming.

As for the action, here is a brief summary of what story I'm trying to tell : a squad of ARC are infiltrating a droid to destroy it, using a stolen CIS ship. Upon their arrival, they face heavy resistance.

Trying to breath life in these scenes is really fun, and it uses multiple tricks, from the droid falling off the bridge to the one being pushed by the shield, plus the clone jumping on a droid to stab it. Speaking of, here they are !

The clones :

MOC postures :

Rest postures :

Custom clones ! I absolutely love making these, and I still have a lot of similarly customised ones on my shelves. The ARCs from the battle pack look awesome, and even if they all have the same prints and color, it doesn't take much to change their appearance.

Sadly, I couldn't find enough kamas for all of the, so only the first and third ones have one. Same goes for the pauldron, so only the three first have one (plus the fifth, but it's a different kind which, I think, comes from a mando). For visors and rangefinders, the choice was mostly arbitrary, because I have a lot of each, so I tried to guess who of the clones would need them, according to their roles (because they have roles. And names, too ! From left to right : Orders, Surge, Bacta, Gears, and Stalker.) I also used the kneeling posture, which is, essentially, in half my TCW MOCs (just check out this one if you're doubting me. Or if you want to see a really cool thing, too.)

A lot of weapons are at least partially custom too :the left clone's weapon (hands can be attached at the bottom of the weapons as a grip); the Z-6 for the next one (would be better if Lego had black versions of the grey pieces, but alas, they don't exist as of yet), the shield (held together by an actual 2*3 shield piece, and the printed GAR cog is just the perfect piece to go with it), the rocket launcher (as screen accurate as I could do, which is to say not much). I also used a fancy silver knife as a vibroknife, because why not, after all ?

Another worthy addition :

While Lego's default ARC backpacks are pretty cool, I find this technic really nice to add a proper communication antenna : one lever attached to the side of a minifig roller skate piece. The connection is not very secure, but since it's only used for display, it's alright.

The ship :

As some might have seen already, this is a variation of the 8036 separatist shuttle. It is a bit longer than the original, and have more details on top. I changed the original antenna for a fencing sword piece, which looks better, and adjusted the dorsal wing a wing, as well as the side, to add the CIS-stickered pieces.

Mostly, this version has so much more playability than the original : it was only made to accommodate a droid pilot and one passenger. This version can fit : one pilot and one astromech in the front, plus a whole bunch of minifigs in the back; and the two parts are connected. Ironically, it won't ever be seen, but it still is a nice thing to know.

You're still here ? Well, I guess you enjoyed this MOC then. If it is the case, stay tuned, because I still have one big TCW diorama which I need to figure how to showcase, and another one in the making, which will also be terribly hard to showcase, but that will be a problem for later me !

✨Books !✨

A small gift made for a relative ! I’m not entirely happy with the result, because it feels a bit empty, but anything I tried to add did not help (such as plants, to get a result similar to this old MOC I made a while ago).

Anyway, other angles, because I like these small MOCs to be visible from all angles :

Also, if anyone like the design of these books, you might want to check what lies below~

Feel free to use this !

I made this because I did some tests virtually before actually building it, and although I slightly modified the design to stack them up, it’s pretty much the same~

✨Progress pride flag !✨

Yay ! Finally some colours ! This was definitely trickier to do, compared to all the other ones, because of the triangles, but I like how it looks !

See previous here.

✨The Kraken !✨

I’ve been messing around with water technics recently, and this was born. It certainly could be improved, but I like it like that.

There’s not much to mention about the build itself; except maybe the tentacles, which are only made out of the 1x1 round bricks, and nothing inside : they bend quite well and remain relatively sturdy when doing so.

As for the water technic I mentioned, the goal is to cover everything with tiles of one of two colours; and make a gradient underneath (see below). I also added some dark red into the mix to try and replicate the body of the thing underwater, with mitigated results.

✨Small spaceships !✨

Assault ship (A-1)

Simple but not too bad in detail for a thing that small. Some light-grey highlights have been under to avoid a completely not textured look. The transparent piece also seems better with peg, when compared to a tile. Not sure of why, but l'm not gonna complain, as long as it works. While it's hard to tell with this scale, this is not just a small thing for 1-2 pilots, it's actually quite large (consider a 2×1 as a container (with the large ship above as a scale) so it's quite large. Not LARGE large, but still enough space to fit a lot of stuff; and since the engines are outside of the main hull, no space wasted !

Personal ship (P-1)

Pretty classic shape, with some obvious Star Wars inspiration. I tried adding a little bit of color (hence the single blue piece but I'd need to get some specialised pieces to add some proper colors. So I took the liberty to add some silver pieces, instead, which looks alright. I'm not entirely sure about the scale of that one, to be honest. It looks like a 1 pilot ship, but it would be a little too big if I consider it in the scale I've set - which I do.

So, l've added numbers to identify them, which should be a good idea in the long run, because there's gonna be so many of these ! And I'm bad at names, too. So this seems like a good idea. Suggestions are obviously welcome if you happen to have any. Please help me-

On a more fun not, I’ve received all the transparent bars I’ll need to make sure these ships are flying all around, and if it’s one bar per ship, I’ll need a whole lot more ships.