Ah, I Knew A Special Occasion Would Present Itself That Would Be Worthy Of This Cat !

✨Clone wars diorama !✨

Another one, technically the largest I have posted (yet~), featuring the 212th and a (placeholder) Jedi.

Of course, closeups and additional details below !

Views from directly in front/above :

Before I continue, I must confess it. This horrendous mistake, which you might spot by paying close attention to the right part of the image.

Yes. I somehow created an offset on the entirety of the wall’s height.

Overall, I’m quite happy with this one, mostly the environment, which turned out great (except for the offset….). What I’m not really sure leases with are the cheap AT-RTs from the battle packs, which are too bulky, but it works well enough for the moment, and since I’m not exposing to any connoisseur, it does the job.

Most of the minifigs are from these battle packs too, except for the Jedi, which is actually a savage oppress with a cloak, but every time I try to just remove the minifig, it feels like something is missing. The paratrooper captain has the hold grey kama and pauldron which always work well, even if it could have done with an additional visor.

Anyway, let’s get going with the closeups !

AT-RT scenes :

On the left, an engineer (my favorite kind of clone) fixing a broken down leg, with the help of one of the pilots. It was hard to get the minfigs in a 'lively' position, and the photo doesn’t render it correctly. The small white backpack is a piece I’ve stolen from the 501st specialist pack, because it’s nice.

On the right, a paratrooper with a completely inaccurate rocket launcher (the clone wars’ ones don’t look as cool, though). I quite like the way this part came together, even if it’s just a small detail.

Explosion scene :

I’ll admit it’s my first try with building explosions, and I’ll hopefully improve.

On the right, the clone says hi ! Well. No. He doesn’t, but it’s what he looks like on the photo, which I funny, I’ll admit, but not the image I wanted to convey, even if technically he’s set properly, as a projectile caused by the explosion.

The picture on the right convey the feeling of movement much better, with the clone shooting on the left, the others running along, and the paras being blown.

Other scenes :

The focus on the left is the droid ! I really like how it’s sprawled over that rock. Other droids can be found in the diorama, notably one being crushed by the rocket launcher AT-RT, partially under a rock, and part of one in the explosion.

On the right, we see a paratrooper down (but still fighting !) with, at his side, a medic applying a hypo. While it’s hard to see with this picture, he has a pouch at his side, and some chroma-black legs, because I was missing a pair of legs the medic has prosthetic legs, isn’t that awesome and convenient ? That is a lesson to learn, any lack can become lore ! Well, kind of. It’s what I also did with the Kashyyk MOC : I was missing all but the helmet of my ninth minifig, so I turned it into a grave of the missing squad member.

✨Custom stone Toa !✨

Yay ! It’s so big there are shadows on the top of my shelf studio.

Also, we’re already at 4/6 for these, isn’t that crazy ? I think it is.

Details below the cut !

Front/back :

I had some kind of vision with this one. As I started messaging by around with pieces, my brain said 'scorpion'. So mandibles and tail (and that’s about where the scorpion resemblance ends). Of course, I had to keep an element of Pohatu, so his foot is the end of the tail (which is quite wobbly-).

I tried to vary shapes from what I had previously, so I made some big shoulder parts, which look okay and offer some interesting movements, but are pretty weird if you think about it too hard.

The body-legs connection is a bit thin, but it still kind of work with the overall design, so I left it that way (that, and I am running out of brown pieces…)

The weapon are simple sticks with harpoons (?), nothing too complicated, though it was meant to be a single stick originally, it was waaaay to long for the photos. Also, has anyone any idea of which set these harpoons (still '?') come from ? I can’t seem to find it, apparently.

Side shot :

As you may see, I’ve made all the limbs quite thick, because it fitted what I had in mind well, and I messed with a bunch of old pieces for the legs (mostly the sand pieces). There is also have a Bohrok’s body for each foot, because these work surprisingly well, and the middle segment of the leg is backward to give some hypothetical springiness to the legs. Also, Rahkshi feet as armor, that’s always a good recipe.

Head shot ! (Ah, that’s funny.)

Look at how dark that shot is ! If only I had taller shelves…

Anyway, the head is a mix of Rahkshi and Vahki heads, which mix well (there is also a gear underneath. Don’t ask me why. It just exists.)

All of that makes it looks like a V2 Rahkshi (when there is a single stick) which was pretty much on purpose.

On a side note, I’m pretty much done with my big project (which is good, I’m meant to expose it this weekend. Whoops, that’s suddenly very close.)

And, yes, I finally added the #moc, thank you for reminding me every time, I’ll add it from now on :}

Here’s my take on a batch of custom Nexo Knights minifigs !

Closeups and thoughts under the cut

So, in no particular order, the closeups, with comments and comparisons with the actual characters from the original Lego theme (also, because of Tumblr’s image limits, I had to badly stitch together my pictures, sorry-)

1) Mace

Pretty cool one, and the only girl in the team in the original cast, who also happen to have troubles because her dad is the king. But eh, none of that here, so she get the cool cloak I assign to any cool red character I can find (yes, you’ll see it again many times in the future). The overall design is pretty nice (mostly this face, the other one on the brick is not as good; the printed armor, which is from season 4, is pretty nice, and does a nice job with the large dark piece (coming from later Hero Factory sets). The weapons are from the Chima theme (and so is the cloak !). The hairs are from the only Tron set, which should have been continued as whole theme but eh-

2) Axel

Stupid and muscular originally. Well, now he’s got a Large Axe (Bionicle) to stand to his name. The helmet is all Nexo, but with some custom brew of mine, and so is the shield. Also, the custom arm was possible because the large chest has a technic pin.

3) Clay(more)

Not room much modifications on the base character (s1). The sword is from a season four version of the character, the shield is homemade with some fun pieces I had lying around. The two arms are modified from the Ultimate set. …which I transformed in guns…Yeah.

4) Aaron

Green ! Always had a cooler weapon. The armor is from the mech set, the chest piece is from s3-4, the Google’s are from the Ultimate set, and the shoulder thingy is from Boba Fett. I kept the original shield with some added pieces, which is made to fly (like with the original al character) but changed the face to give him a more serious expression. The weapon is mostly from the original crossbow, with some nice twists (the beam on the first image is from a ninjago sword).

5) Lance Whatever their name is now

Really a bad character : rich, 'very pretty', egocentric. So, well…I took the armor and made an entire new one. I really like them, but it might be because it took an awful lot of time to figure out the weapon (transparent white piece similar to the green beam mentioned above). Armor-wise, it’s s1 body, with a grey pauldron (Clone Wars) and a light grey kama (…Also Clone Wars). The hairs are a really cool piece from a Ninjago set, and the head…Come from a City ski set. But the orange visor makes it work !

6) Never remembered the name of that one

Original character is a very smart kid with not much development in the show. Well, firstly I made him an adult (legs are from a black widow figure), and then I decided to push the technical side a little. So, full suit with crystal swords, which works ! Most pieces are actually from the theme, except the red dots (Ninjago again), the crystals in the back (Power Mine [really a cool theme !]), and the helmet (City firefighters + Ninjago…again). It was the first one I made, which made me do the others.

I might get them in a diorama at some point, to set them against the very many custom monsters from the same theme (which were already much cooler than the original minifigs). In fact, most of the theme was really cool, the two sad points are that it was discontinued, and the TV show was…Well, it didn’t push much sci-fi nor fantasy, so I had to do the job.

Now, with that post I have finally revealed my three favorites things to do with legos : Dioramas, Big Mechs, and Custom minifigures (plus any Clone Wars related stuff, but it’s probably just as much because of the fandom aspect as it is the Lego aspect). One day perhaps, I’ll get all three of these aspects in one epic scene, but I have no idea of how for now, so maybe later~

Following in my pride flag series :

✨Ace pride flag✨

(Previous work here !)

✨ Breach of containment ✨

This is the last I’ve been working on for the past few weeks, very, very inspired by the game Carrion (if you haven’t played it yet, you absolutely should !), which is made all the more special because I finally took time to use my lighting kit (seem below). Of course, closeups and commentaries below the cut

Left containment unit closeups :

Right containment unit closeups :

Top closeup :

Alt version (studio lights + in-built lights) :

This is one of the screenshots I’ve been working with (where the monster just breached containment) :

So, as I said previously, this piece is heavily inspired by Carrion. I tried to look up any previously made Lego thing related to the game, but all I could find were a few Reddit posts with (debatably) interesting takes on the monster. So, the good news is that this is most likely the most original piece I’ve made yet.

The original plan was to have only one container, and one monster, with left being the body inside and right being the outside part. However, placing Left in the middle of the transparent pieces made it mostly good on its own, so with some modifications, I made it work alone and expanded the outside part inward, and ended up with two of them.

Left is pretty okay from all angles, but Right is not necessarily as good from the back, and had a supplementary jaw on the side of the container which can’t be seen on the photos.

Getting back to comparing that to the game. I tried to stay close while adding my own little details. The wiring and cable system is from me, but the container is mostly inspired by the game, just like the electric box (middle) and the little informative display (under the electric box) which is…empty, yes.

Some details can’t be seen on the photos (or barely), which are mostly some filler sci-fi stuffs to make the wall less flat and less empty.

What also helped with breach the flatness of the wall is the switch from dark grey to light gray, using the awesome spring projectile launcher piece, which has this very nice shape which make the transition just a bit smoother.

So, let’s talk about whatever I’ve done with the lighting !

I’ve had this old lighting kit (originally designed for a car model) lying around for a long time, and finally got to use it ! It doesn’t look really good without my studio lights because my camera is not made for that (The effect in reality really gives escaping monstrosity a dark vibe which is not well depicted with my photos…). Another thing which is not noticeable with the photos is that the two red dots in the center are actually blinking lights (and somehow, they tend to desynchronise).

The choice of letting some of the wires out is debatable, but I think it adds to the vibe (and some of them would have been a pain to hide anyway). And sadly, the back is but a mess of wires, but I can’t actually do anything about that.

Speaking of the back, the whole thing is one dot large and completely flat, and the ceiling only hold without pillars because of the use of tension linking directly the baseplate and the roof through the use of technic bars; and probably because the ceiling itself is not that heavy. It is, in fact, only constitued of six old road pieces connected together and frames, which give the roof little weight and high sturdiness (and the shape on the side of the piece offers a nice sci-fi effect as a bonus).

The addition of tentacles in the vent (which hides the connection between road plates in the roof) is just another reminder of the game : you can’t be safe anywhere, if air flows~

✨The Kraken !✨

I’ve been messing around with water technics recently, and this was born. It certainly could be improved, but I like it like that.

There’s not much to mention about the build itself; except maybe the tentacles, which are only made out of the 1x1 round bricks, and nothing inside : they bend quite well and remain relatively sturdy when doing so.

As for the water technic I mentioned, the goal is to cover everything with tiles of one of two colours; and make a gradient underneath (see below). I also added some dark red into the mix to try and replicate the body of the thing underwater, with mitigated results.

✨ Custom AT-TEs ! ✨

(Not entirely custom, actually, but more like a custom paint job / some tweaks)

These two pieces are part of a larger custom clone battalion, the 284th, that I’ll explain in detail in another post. In the mean time, these are already in use on a larger mix that doesn’t exactly fit in my small studio right now (I’m talking BIG moc)

Individual views :

The stickered plate, stolen from a Ninjago set, was awfully convenient, you may understand why here (not posted yet)

✨Custom clones !✨

I really like messing around with minifigs, and I had recently got my hand on a 501st battle pack, which meant I had some spare accessories !

Of course, custom weapons, else it would be no fun, and of course of of them use illegal technic, because it's kind of my signature at that point. I really like how they all turned out - including the Dimension plates which are a really nice display base.

The most interesting piece it the small cloak piece I used on the sword one (Nexo Knight sword obviously !), because, first of all, it's blue, and it comes from some Marvel sets, which isn't a theme I manipulate often - which is a shame, there are some really cool pieces in there.

Also, these need names, but I did not find any yet...

✨Custom ice Toa !✨

And another one ! If the others were already experimental, this one is much, much more-

Closeups under the cut !

Front/back views :

That one was a lot of fun ! But it’s also not really stable, considering there are some weird piece combinations. This one also has disproportionate legs, compared to the rest of the body, but it’s alright.

With that one, I really tried to remain within Kopaka’s spirit (notice the ski blades and the Kanohi). The bow and arrow (which doubles down as a lance, and is using one of Kopaka’s blades), is a weapon I don’t think has been used before in the original bionicles (correct me if I’m wrong).

The arms/hands are using Pridak’s feet, because it works well and still allows for large movements.

I used some darker white pieces on the back and shoulders to get some slight contrats, and used technic pieces on the chest to get a proper body shape, with a leg piece underneath.

Legs :

(Too) Many details on the legs ! The blades under the feet are a combination of Kopaka Nuva’s blades and Glatoran blades, which also hold a shoulder piece used as a supplementary leg pieces.

Now is the here we enter the mess : all of the ankle sockets you can see are not used for the articulations, and are only here to keep the back piece in place (Star leg), while the actual socket is behind the technic gear plate. Then there is a socket which doesn’t even have a ball, it is directly stacked on top of another socket, and I use multiple feet to cover the leg areas which would expose how terrible the inside is. At the front, you might also notice a 1*2 curved slope tile held by two technic pins. It’s floppy, and it looks weird from the side, but the front appearance makes it worth it. Finally, at the front, I also use part of a Vahki’s head as a final plate, before we finally reach the connection between the legs and the body. As I said, that whole part is a mess.

Head :

Tried to remain close to Kopaka’s appearance here too, by adding a X-ray vision thing, but the most important part is that the Kanohi is Hero Factory Stormer’s mask, but sideways. The trans blue pieces are Borhok eyes, which fit perfectly, and I managed to cram a socket connector inside, making the head quite mobile and sturdy.

Next week is another one ! Not sure which of the three it will be, but I haven’t decided which one yet (tell me if you have a preference~).

I also finally received my new parts, meaning I can get back to working on my big project, yay !

Hey I don't know if you saw my repost on your post but I would appreciate and would definitely built a brickheadz version of the boba fett prototype minifig that I have as my profile picture. Your post says feel free to request any more and I thought it was worth a shot even though I doubt he'd appeal to more people than me.

✨Boba Fett Prototype ! ✨

Hi ! This has been in my inbox for ages, I know. Finally had time to give it a try ! Had a lot of fun, actually, mandos have some really interesting shapes.

And, because it took me so long, I figured, I'd also give instructions, too. Some colours might not be available, though, but white should be pretty easy to find for the outside pieces.

Instructions can be found here !