The One Who Waits

I did finish it , though I feel like I overdid it once again

Less noise version and less saturated (almost grey version) below the cut

Too tired to add tags but I love this and would love to see more of their campaign

D&D night of the Old Faith

They say the only way to get a steady D&D group is by using your own siblings. That means having to deal with Edgy Narinder, Murderhobo Leshy, Charge Heket and the Bard™. Thank you to all the Anons who asked me about D&D for Shamura and their siblings! You inspired this little silly comic, I hope you see and like it!💙

I wish I was normal

Sound on !

Warnings : violence/gore, flashing lights, spoilers for Gravity Falls/Journal 3/The Book of Bill

Saw someone suggesting Your Wicked Company by Harley Poe as a Billford song and then I blacked out for two months

this week's sneepsnorp club update just went out! :D project birdbrain update 6 is up to check out in my art journal, and there's an update on delayed sticker club rewards!

I need

minecra grimps

longarm shrimp and glass shrimp

"All who worship and feed me, the great snake, Cobraia. Shall never know the plight of hunger themselves."

I've had the idea for a Cult of the Lamb 2 for awhile.

Cult of the Lamb 2: Missionary Journey

In it the Lamb decides to travel to reaches beyond the Lands of the Old Faith. Finding other gods to face and more followers to recruit. But they cannot do it entirely themselves. As there is still the main part of their cult to run. The Lamb recruits local, fellow bovine followers. Each gifted with a copy given crown, allowing them to wield vessel powers of their own. Their strength only able to grow by their own, and others' growing devotion to the Lamb. Able to call upon the Lamb should they need them. The Lamb's missionaries spread the gospel of the Lamb across the lands beyond. Facing vengeful gods of their own, who will not take the Lamb engrossing on their territory and devotion without a fight.

Cobraia is the God of Gluttony and ruler of the desert known as the Sweltersands. She is an all consuming entity, her hunger never to be satisficed. Those who chose to serve her and swear their devotion, she promises an everlasting fast. Cobraia consumes her followers hunger, she eats their fill. Many of her followers have gone their entire lives without ever starving. To which they worship faithfully, believing she truly spares them a great plight. Cobraia hungers not just for sustenance, but for more power and devotion. Cobraia is very cunning and is a sly serpent in making bargains. Seeing through the eyes of all snakes in the world, She new the Bishops of the Old Faith would fall. She however agreed to devour the lambs of her land in contingency gain their favor. But Cobraia also keep something from them, to make a pact with The One Who Waits. However things did not go as anticipated. How was she to know The One Who Wait's liberation would be as a mortal to instead follow his promised liberator. Though Cobraia can still use her secret bargaining chip against the Lamb as well. Soon she will consume the red crown and absorb its power. The Lamb dare not face her, surely they'd surrender to her. Knowing in the great snake's possession, was what the Lamb wanted most of all.

Truthfully any who worshipped Cobraia would have nothing to fear from Heket. Cobraia always thought amphibians were inferior to reptiles.

Cobraia is known by many names. The God of Gluttony, the All Consumer, The Great Snake or Serpent, Saltan of the Sweltersands, Desert Deity, and the Great Devourer(Yes, I did that one of purpose).

The awesome badass Beastar and Legoshi

I wanted to do a more "realistic" take on Gosha and Legoshi while keeping identifiable aspects. Like Gosha has green undertones ( instead of neon green that I do not understand), and Legoshi is on the cooler, lighter side. They both have similar eye shapes as well as the yellow in the pupil, which are suggested in canon that they have the same eyes.

I took some liberties on how the 1/4 komodo dragon would show in Legoshi, specifically his long neck and generally shorter fur. I think komodo dragons and gray wolves in universe would be very similar in size and komodos are slightly bigger than wolves but they end up shorter because they have shorter legs. Legoshi is the size of a komodo as well as a long neck, but the taller wolf legs.This ends up with Legoshi being quite large compared to both species (not to mention his dad is also a large wolf). Despite his shorter fur, he's still cuts it shorter than typical wolves, keeping his head and tail longer.

I could not get Gosha's colors right to save my life. I got somewhere where I could tolerate it but if I were to draw him again, he'd probably look different 😅 but I'm very happy with his shapes. He actually looks like a komodo dragon! That's all I could ask for honesty.

Hello! I was wondering what company you use for your sticker sheets? I bough one from your Ko-Fi shop and really like the quality, and the pricing you were able to sell at is waaaaaay more reasonable compared to any of the companies I've seen and used myself. Is it a POD company, or a mass purchase of them to sell on your own?

Thank you for your time if you're able to respond!

I'm really glad you like the quality, because I actually make them by hand at home! (Please forgive the lighting, my bedroom is my office lmao.)

I don't use a company (and Idk what a POD company is sorry!) but making them at home gives a lot more freedom of stock, just be wary it can be very time consuming depending on how many you need to make.

I've had other people ask before, so here's a rundown of how I make my stickers at home: At most you'll need:

Printer

Sticker paper (this is the type that I use)

Laminator and lamination paper (the lamination paper that I use.) You can also use adhesive non-heat lamination paper if you don't have a laminator, gives you the same result, just be careful of bubbles. You will get double your worth out of a pack because we are splitting the pouches to cover two sticker sheets.

Your choice of a sticker cutting machine or just using scissors.

First, I use Cricut's software to print out the sticker sheet with the guidelines around the corners so the machine can read it. If you do NOT have a Cricut machine, open up your art program, make a canvas of 2550x3300 and fill it up with your sticker design with some cutting space between them. This the 8.5x11 size for the sticker page.

I usually have bleed selected so the cut comes out cleaner. Tip for non-Cricut users below: Increase the border around your sticker design to fake the 'bleed' effect for a cleaner cut.

These are the print settings I use for my printer. I use the 'use system dialogue' to make sure I can adjust the settings otherwise it prints out low quality by default. Make sure if you're using the above paper that you have 'matte' selected, and 'best quality' selected, these aren't usually selected by default.

So you have your sticker sheet printed! Next is the lamination part. I use a hot laminator that was gifted to me, but there is no-heat types of lamination you can peel and stick on yourself if that's not an option.

(This is for protection and makes the colors pop, but if you prefer your stickers matte, you can skip to the cutting process.)

Important for Cricut users or those planning to get a Cricut: You're going to cut the lamination page to cover the stickers while also not covering the guidelines in the corners. First, take your lamination page and lay it over the sheet, take marker/pen and mark were the edges of your stickers are, and cut off the excess:

(I save the scrap to use for smaller stickers or bonuses later on)

After you've cut out your lamination rectangle, separate the two layers and lay one down on your sticker sheet over your stickers with matte side down, shiny side up. (Save the other sheet for another sticker page)

The gloss of the lamination will prevent the machine from reading the guidelines, so be careful not to lay it over them. It also helps to cut the corners afterwards to prevent accidentally interfering with the guidelines.

Now put that bad boy in the laminator! (Or self seal if you are using non-heat adhesive lamination)

Congrats! You now have a laminated page full of stickers.

For non-cricut/folks cutting them out by hand: this is the part where you start going ham on the page with scisscors. Have fun~

Cutting machine: I put the page on a cutting mat and keep it aligned in the corner, and feed it into the machine. For laminated pages I go between 'cardstock' and 'poster board' so that it cuts all the way through without any issues, but for non-laminated pages or thinner pages, I stick for 'vinyl' and 'light card stock'. Kinda test around.

Now I smash that go button:

You have a sticker now!

The pros of making stickers at home is that you save some cost, and you have more control of your stock and how soon you can make new designs. (I can't really afford to factory produce my stickers anyway)

However, this can be a very time consuming, tedious process especially if you have to make a lot of them. There is also a LOT chance for some errors (misprints, miscuts, lamination bubbles, ect) that will leave you with B-grade or otherwise not-so-perfect or damaged stickers. (Little note, if you have page mess up in printing and can't be fed into the cricut machine, you can still laminate it and cut it out by hand too.)

I have to do a lot of sticker cutting by hand, so if you don't have a cricut don't stress too much about it. I have an entire drawer filled to the top of miscuts/misprints. I keep them because I don't want to be wasteful, so maybe one day they'll find another home. Sucks for my hand though.

But yeah! This is how I make my stickers at home! Hope this is helpful to anyone curious

Lamb

lamb